Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to get a list of all AutoText files in the left pane
this will disable only autotext function not already disabled and enable only those that were not disabled before dialog start

Function Dialog_Edit_Autotext
Code:
Copy      Help
out
str- sItems
str- sdItems
sub.DisableEnableAutoText(1 "" sItems sdItems)         

str dd=
;BEGIN DIALOG
;0 "" 0x90C80AC8 0x0 0 0 334 188 "Edit Existing AutoText"
;3 Edit 0x54030080 0x200 9 8 120 14 ""
;4 ListBox 0x54230101 0x200 9 22 120 157 ""
;5 Edit 0x54030080 0x200 145 8 174 14 ""
;6 ListBox 0x54330101 0x200 145 22 174 157 ""
;1 Button 0x54030001 0x4 116 200 48 14 "OK"
;2 Button 0x54030000 0x4 168 200 48 14 "Cancel"
;END DIALOG
;DIALOG EDITOR: "" 0x2040802 "*" "" "" ""

str controls = "3 4 5 6"
str e3 lb4 e5 lb6
lb4=sItems
if(!ShowDialog(dd &sub.DlgProc &controls)) ret


#sub DlgProc
function# hDlg message wParam lParam
str- itemslb2
int- lb6lc
str- sItems
int i
str- sdItems
sel message
,case WM_INITDIALOG
,SetProp id(3 hDlg) "wndproc" SubclassWindow((id(3 hDlg)) &sub.EditSubclassProc)
,SetProp id(5 hDlg) "wndproc" SubclassWindow((id(5 hDlg)) &sub.EditSubclassProc)
,case WM_DESTROY
,RemoveProp id(3 hDlg) "wndproc"
,RemoveProp id(5 hDlg) "wndproc"    
,case WM_COMMAND goto messages2
,case WM_TIMER
,sel wParam
,,case 1
,,KillTimer hDlg wParam
,,int hlb=id(4 hDlg)
,,SendMessage hlb LB_RESETCONTENT 0 0
,,str s3 sEdit3.getwintext(id(3 hDlg))
,,foreach s3 sItems
,,,if(sEdit3.len and find(s3 sEdit3 0 1)<0) continue
,,,LB_Add hlb s3
,,int count=LB_GetCount(hlb)
,,if count=1
,,,SendMessage hDlg WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 hDlg)) id(4 hDlg)
,,,;LB_SelectItem(hlb 0)
,,case 2
,,KillTimer hDlg wParam
,,int hlb2a=id(6 hDlg)
,,SendMessage hlb2a LB_RESETCONTENT 0 0
,,str s5 sEdit5.getwintext(id(5 hDlg))
,,foreach s5 itemslb2
,,,if(sEdit5.len and find(s5 sEdit5 0 1)<0) continue
,,,LB_Add hlb2a s5
,,int count2=LB_GetCount(hlb2a)
,,if count2=1
,,,LB_SelectItem(hlb2a 0)    
ret
;messages2
int h=GetQmCodeEditor
int hlb2=id(6 hDlg) ;;list box 2
sel wParam
,case IDOK
,sub.DisableEnableAutoText(2 sdItems)
,case IDCANCEL
,sub.DisableEnableAutoText(3 sdItems)
,case EN_CHANGE<<16|3
,SetTimer hDlg 1 100 0
,case EN_CHANGE<<16|5
,SetTimer hDlg 2 100 0    
,case LBN_SELCHANGE<<16|4
,str lb1si
,_i=LB_SelectedItem(lParam lb1si)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb1si)
,str lb2ii 
,itemslb2=sub.gotoitemedit(lb1si)
,SendMessage(hlb2 LB_RESETCONTENT 0 0)
,itemslb2.findreplace(":sub." "     ")
,itemslb2.findreplace(";;" "     ")
,itemslb2.findreplace(":" "     ")
,foreach lb2ii itemslb2
,,LB_Add(hlb2 lb2ii)    
,lb6lc=LB_GetCount(hlb2)
,case LBN_DBLCLK<<16|4
,_i=LB_SelectedItem(lParam _s)
,mac+ _s    
,case LBN_DBLCLK<<16|6
,str lb2t
,_i=LB_SelectedItem(lParam lb2t)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb2t)
,int lb6ic=LB_GetCount(lParam)
,if(lb6ic<>lb6lc)
,,ARRAY(str) b=itemslb2
,,for i 0 b.len
,,,if(StrCompare(b[i] lb2t)=0)
,,,,_i=i
,,,,break
,LB_SelectedItem(id(4 hDlg)  _s)
,mac+ _s
,SendMessage(h SCI.SCI_GOTOLINE _i+1 0)
,int ii=findrx(lb2t "Sub." 0 1)
,if ii!=-1
,,int cp=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
,,cp+ii
,,SendMessage(h SCI.SCI_GOTOPOS cp 0)
,sub.FlashCodeLine(_i+1 h)
ret 1

#sub gotoitemedit
function~ ~name
str pattern="(?m)^(.+\s\:.+)"
_s.getmacro(name 0)
str ss d
int i
ARRAY(str) a
findrx(_s pattern 0 4 a)
for i 0 a.len
,d.formata("%s[]" a[0 i])
ret d.trim

#sub FlashCodeLine
function line hce
if(!hce) hce=GetQmCodeEditor
int indicator=9
SendMessage(hce SCI.SCI_SETINDICATORCURRENT indicator 0)
SendMessage(hce SCI.SCI_INDICSETALPHA indicator 100)
SendMessage(hce SCI.SCI_INDICSETFORE indicator 0x00FF00)
SendMessage(hce SCI.SCI_INDICSETSTYLE indicator SCI.INDIC_STRAIGHTBOX)
SendMessage(hce SCI.SCI_INDICSETUNDER indicator TRUE)
int lsp=SendMessage(hce SCI.SCI_POSITIONFROMLINE line 0)
int lep=SendMessage(hce SCI.SCI_GETLINEENDPOSITION line 0)
rep 4
,SendMessage(hce SCI.SCI_INDICATORFILLRANGE lsp lep-lsp)
,0.25
,SendMessage(hce SCI.SCI_INDICATORCLEARRANGE lsp lep-lsp)
,0.25
SendMessage(hce SCI.SCI_SETINDICATORCURRENT 0 0)

#sub EditSubclassProc
function# hWnd message wParam lParam
int cid=GetDlgCtrlID(hWnd)
int Phwnd= GetParent(hWnd)
;OutWinMsg message wParam lParam
sel message
,case WM_DESTROY
,case WM_GETDLGCODE
,sel wParam
,,case VK_RETURN
,,ret DLGC_WANTALLKEYS
,case WM_CHAR
,sel wParam
,,case VK_RETURN
,,sel cid
,,,case [3,5]
,,,ret 0
,case WM_KEYDOWN
,sel wParam ;;virtual key code
,,case VK_RETURN
,,;on enter in the edit box select the item in the list box
,,sel cid
,,,case 3
,,,SendMessage Phwnd WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 Phwnd)) id(4 Phwnd)
,,,case 5
,,,SendMessage Phwnd WM_COMMAND LBN_DBLCLK<<16|GetDlgCtrlID(id(6 Phwnd)) id(6 Phwnd)
,,ret
,,case [VK_DOWN,VK_UP,VK_PRIOR,VK_NEXT]
,,;relay these keys to the listbox and not to the edit box
,,sel cid
,,,case 3
,,,SendMessage id(4 Phwnd) message wParam lParam
,,,case 5
,,,SendMessage id(6 Phwnd) message wParam lParam            
,,ret

int wndproc=GetProp(hWnd "wndproc"); if(!wndproc) ret
ret CallWindowProcW(wndproc hWnd message wParam lParam)
#sub DisableEnableAutoText 
function mode [str'dati] [str&atItems] [str&atditems]
QMITEM q; int i j k
ARRAY(str) atn atd
rep
,i=qmitem(-i 1|16 &q 1)
,if(i=0) break
,if q.itype=4
,,atn[]=q.name
,,sel mode
,,,case 1
,,,if(dis(q.name))
,,,,atd[]=q.name
,,,else
,,,,dis+ q.name
,,,case else
,,,int fdat=findw(dati q.name 0 "[]") 
,,,if fdat = -1
,,,,dis- q.name
if mode <>1
,ret
atItems=atn
atditems=atd
Wow!!
perfect
Tongue

List width cannot be fully displayed


Attached Files Image(s)
   
strange post autotext function that has that
Vertical scroll bars are not available now, only horizontal scroll bars are available
did you change dialog style?
NO,  I am using your code
found the problem somehow lbs multicolumn style was turned on fixed in code above
OK, now it’s successful. thanks a lot

I can't all use the keyboard to open the AutoText item. Enter key is invalid

My steps are as follows
1. type t2
2. Press tab three times
3. Press the arrow keys to select an item
4. Enter (now is invalid

Please see the picture below

In addition, I need to close the dialog box after pressing the Enter key in the fourth step.
I think the Enter key has to be handled a lot, it is a bit difficult


Attached Files Image(s)
   
Enter in listbox is not handled so it does default which is close the dialog. Requires more programming. Will fix later I'm off to sleep now.
ok, thanks a lot  Smile
changed the code a little bit using better subclass process than previous.

Function Dialog_Edit_Autotext
Code:
Copy      Help
out
str- sItems
str- sdItems
sub.DisableEnableAutoText(1 "" sItems sdItems)         

str dd=
;BEGIN DIALOG
;0 "" 0x90C80AC8 0x0 0 0 334 188 "Edit Existing AutoText"
;3 Edit 0x54030080 0x200 9 8 120 14 ""
;4 ListBox 0x54230101 0x200 9 22 120 157 ""
;5 Edit 0x54030080 0x200 145 8 174 14 ""
;6 ListBox 0x54330101 0x200 145 22 174 157 ""
;1 Button 0x54030001 0x4 116 200 48 14 "OK"
;2 Button 0x54030000 0x4 168 200 48 14 "Cancel"
;END DIALOG
;DIALOG EDITOR: "" 0x2040802 "*" "" "" ""

str controls = "3 4 5 6"
str e3 lb4 e5 lb6
lb4=sItems
if(!ShowDialog(dd &sub.DlgProc &controls)) ret


#sub DlgProc
function# hDlg message wParam lParam
str- itemslb2
int- lb6lc
str- sItems
int i
str- sdItems
sel message
,case WM_INITDIALOG
,SetWindowSubclass((id(3 hDlg)) &sub.EditSubclassProc 3 0)
,SetWindowSubclass((id(5 hDlg)) &sub.EditSubclassProc 5 0)
,SetWindowSubclass(id(6 hDlg) &sub.ListBoxSubclassProc 6 0)
,case WM_DESTROY
,case WM_COMMAND goto messages2
,case WM_TIMER
,sel wParam
,,case 1
,,KillTimer hDlg wParam
,,int hlb=id(4 hDlg)
,,SendMessage hlb LB_RESETCONTENT 0 0
,,str s3 sEdit3.getwintext(id(3 hDlg))
,,foreach s3 sItems
,,,if(sEdit3.len and find(s3 sEdit3 0 1)<0) continue
,,,LB_Add hlb s3
,,int count=LB_GetCount(hlb)
,,if count=1
,,,SendMessage hDlg WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 hDlg)) id(4 hDlg)
,,case 2
,,KillTimer hDlg wParam
,,int hlb2a=id(6 hDlg)
,,SendMessage hlb2a LB_RESETCONTENT 0 0
,,str s5 sEdit5.getwintext(id(5 hDlg))
,,foreach s5 itemslb2
,,,if(sEdit5.len and find(s5 sEdit5 0 1)<0) continue
,,,LB_Add hlb2a s5
,,int count2=LB_GetCount(hlb2a)
,,if count2=1
,,,LB_SelectItem(hlb2a 0)    
ret
;messages2
int h=GetQmCodeEditor
int hlb2=id(6 hDlg) ;;list box 2
sel wParam
,case IDOK
,sub.DisableEnableAutoText(2 sdItems)
,case IDCANCEL
,sub.DisableEnableAutoText(3 sdItems)
,case EN_CHANGE<<16|3
,SetTimer hDlg 1 100 0
,case EN_CHANGE<<16|5
,SetTimer hDlg 2 100 0    
,case LBN_SELCHANGE<<16|4
,str lb1si
,_i=LB_SelectedItem(lParam lb1si)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb1si)
,str lb2ii 
,itemslb2=sub.gotoitemedit(lb1si)
,SendMessage(hlb2 LB_RESETCONTENT 0 0)
,itemslb2.findreplace(":sub." "     ")
,itemslb2.findreplace(";;" "     ")
,itemslb2.findreplace(":" "     ")
,foreach lb2ii itemslb2
,,LB_Add(hlb2 lb2ii)    
,lb6lc=LB_GetCount(hlb2)
,case LBN_DBLCLK<<16|4
,_i=LB_SelectedItem(lParam _s)
,mac+ _s    
,case LBN_DBLCLK<<16|6
,str lb2t
,_i=LB_SelectedItem(lParam lb2t)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb2t)
,int lb6ic=LB_GetCount(lParam)
,if(lb6ic<>lb6lc)
,,ARRAY(str) b=itemslb2
,,for i 0 b.len
,,,if(StrCompare(b[i] lb2t)=0)
,,,,_i=i
,,,,break
,LB_SelectedItem(id(4 hDlg)  _s)
,mac+ _s
,SendMessage(h SCI.SCI_GOTOLINE _i+1 0)
,int ii=findrx(lb2t "Sub." 0 1)
,if ii!=-1
,,int cp=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
,,cp+ii
,,SendMessage(h SCI.SCI_GOTOPOS cp 0)
,sub.FlashCodeLine(_i+1 h)
ret 1

#sub gotoitemedit
function~ ~name
str pattern="(?m)^(.+\s\:.+)"
_s.getmacro(name 0)
str ss d
int i
ARRAY(str) a
findrx(_s pattern 0 4 a)
for i 0 a.len
,d.formata("%s[]" a[0 i])
ret d.trim

#sub FlashCodeLine
function line hce
if(!hce) hce=GetQmCodeEditor
int indicator=19
SendMessage(hce SCI.SCI_SETINDICATORCURRENT indicator 0)
SendMessage(hce SCI.SCI_INDICSETALPHA indicator 100)
SendMessage(hce SCI.SCI_INDICSETFORE indicator 0x00FF00)
SendMessage(hce SCI.SCI_INDICSETSTYLE indicator SCI.INDIC_STRAIGHTBOX)
SendMessage(hce SCI.SCI_INDICSETUNDER indicator TRUE)
int lsp=SendMessage(hce SCI.SCI_POSITIONFROMLINE line 0)
int lep=SendMessage(hce SCI.SCI_GETLINEENDPOSITION line 0)
rep 4
,SendMessage(hce SCI.SCI_INDICATORFILLRANGE lsp lep-lsp)
,0.25
,SendMessage(hce SCI.SCI_INDICATORCLEARRANGE lsp lep-lsp)
,0.25
SendMessage(hce SCI.SCI_SETINDICATORCURRENT 0 0)

#sub EditSubclassProc
function# hwnd message wParam lParam uIdSubclass dwRefData

int Phwnd= GetParent(hwnd)
;OutWinMsg message wParam lParam
sel message
,case WM_GETDLGCODE
,sel(wParam) case VK_RETURN ret DLGC_WANTALLKEYS ;;send WM_KEYDOWN instead of closing the dialog
,case WM_CHAR
,sel(wParam) case VK_RETURN ret 0
,case WM_KEYDOWN
,sel wParam ;;virtual key code
,,case VK_RETURN
,,;on enter in the edit box select the item in the list box
,,sel uIdSubclass
,,,case 3
,,,SendMessage Phwnd WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 Phwnd)) id(4 Phwnd)
,,,case 5
,,,SendMessage Phwnd WM_COMMAND LBN_DBLCLK<<16|GetDlgCtrlID(id(6 Phwnd)) id(6 Phwnd)
,,ret
,,case [VK_DOWN,VK_UP,VK_PRIOR,VK_NEXT]
,,;relay these keys to the listbox and not to the edit box
,,sel uIdSubclass
,,,case 3
,,,SendMessage id(4 Phwnd) message wParam lParam
,,,case 5
,,,SendMessage id(6 Phwnd) message wParam lParam    
,,ret

int R=DefSubclassProc(hwnd message wParam lParam)

sel message
,case WM_NCDESTROY
,RemoveWindowSubclass(hwnd &sub.EditSubclassProc uIdSubclass)

ret R

#sub ListBoxSubclassProc 
function# hwnd message wParam lParam uIdSubclass dwRefData

sel message
,case WM_GETDLGCODE
,sel(wParam) case VK_RETURN ret DLGC_WANTALLKEYS ;;send WM_KEYDOWN instead of closing the dialog
,case WM_KEYDOWN
,sel(wParam) case VK_RETURN SendMessage GetParent(hwnd) WM_COMMAND LBN_DBLCLK<<16|uIdSubclass hwnd; ret 

int R=DefSubclassProc(hwnd message wParam lParam)

sel message
,case WM_NCDESTROY
,RemoveWindowSubclass(hwnd &sub.ListBoxSubclassProc uIdSubclass)

ret R

#sub DisableEnableAutoText 
function mode [str'dati] [str&atItems] [str&atditems]
QMITEM q; int i
ARRAY(str) atn atd
rep
,i=qmitem(-i 1|16 &q 1)
,if(i=0) break
,if q.itype=4
,,atn[]=q.name
,,sel mode
,,,case 1 ;;disable
,,,if(dis(q.name)) atd[]=q.name
,,,else dis+ q.name
,,,case else ;;enable
,,,int fdat=findw(dati q.name 0 "[]") 
,,,if fdat = -1
,,,,dis- q.name
if(mode <>1) ret
atItems=atn
atditems=atd
double-click or pressing Enter key on the Autotext item . Close the dialog box,  How to achieve?
Function Dialog_Edit_Autotext
Code:
Copy      Help
out
str- sItems
str- sdItems
sub.DisableEnableAutoText(1 "" sItems sdItems)         

str dd=
;BEGIN DIALOG
;0 "" 0x90C80AC8 0x0 0 0 334 188 "Edit Existing AutoText"
;3 Edit 0x54030080 0x200 9 8 120 14 ""
;4 ListBox 0x54230101 0x200 9 22 120 157 ""
;5 Edit 0x54030080 0x200 145 8 174 14 ""
;6 ListBox 0x54330101 0x200 145 22 174 157 ""
;1 Button 0x54030001 0x4 116 200 48 14 "OK"
;2 Button 0x54030000 0x4 168 200 48 14 "Cancel"
;END DIALOG
;DIALOG EDITOR: "" 0x2040802 "*" "" "" ""

str controls = "3 4 5 6"
str e3 lb4 e5 lb6
lb4=sItems
if(!ShowDialog(dd &sub.DlgProc &controls)) ret


#sub DlgProc
function# hDlg message wParam lParam
str- itemslb2
int- lb6lc
str- sItems
int i
str- sdItems
sel message
,case WM_INITDIALOG
,SetWindowSubclass((id(3 hDlg)) &sub.EditSubclassProc 3 0)
,SetWindowSubclass((id(5 hDlg)) &sub.EditSubclassProc 5 0)
,SetWindowSubclass(id(6 hDlg) &sub.ListBoxSubclassProc 6 0)
,case WM_DESTROY
,case WM_COMMAND goto messages2
,case WM_TIMER
,sel wParam
,,case 1
,,KillTimer hDlg wParam
,,int hlb=id(4 hDlg)
,,SendMessage hlb LB_RESETCONTENT 0 0
,,str s3 sEdit3.getwintext(id(3 hDlg))
,,foreach s3 sItems
,,,if(sEdit3.len and find(s3 sEdit3 0 1)<0) continue
,,,LB_Add hlb s3
,,int count=LB_GetCount(hlb)
,,if count=1
,,,SendMessage hDlg WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 hDlg)) id(4 hDlg)
,,case 2
,,KillTimer hDlg wParam
,,int hlb2a=id(6 hDlg)
,,SendMessage hlb2a LB_RESETCONTENT 0 0
,,str s5 sEdit5.getwintext(id(5 hDlg))
,,foreach s5 itemslb2
,,,if(sEdit5.len and find(s5 sEdit5 0 1)<0) continue
,,,LB_Add hlb2a s5
,,int count2=LB_GetCount(hlb2a)
,,if count2=1
,,,LB_SelectItem(hlb2a 0)    
ret
;messages2
int h=GetQmCodeEditor
int hlb2=id(6 hDlg) ;;list box 2
sel wParam
,case IDOK
,sub.DisableEnableAutoText(2 sdItems)
,case IDCANCEL
,sub.DisableEnableAutoText(3 sdItems)
,case EN_CHANGE<<16|3
,SetTimer hDlg 1 100 0
,case EN_CHANGE<<16|5
,SetTimer hDlg 2 100 0    
,case LBN_SELCHANGE<<16|4
,str lb1si
,_i=LB_SelectedItem(lParam lb1si)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb1si)
,str lb2ii 
,itemslb2=sub.gotoitemedit(lb1si)
,SendMessage(hlb2 LB_RESETCONTENT 0 0)
,itemslb2.findreplace(":sub." "     ")
,itemslb2.findreplace(";;" "     ")
,itemslb2.findreplace(":" "     ")
,foreach lb2ii itemslb2
,,LB_Add(hlb2 lb2ii)    
,lb6lc=LB_GetCount(hlb2)
,case LBN_DBLCLK<<16|4
,_i=LB_SelectedItem(lParam _s)
,mac+ _s    
,case LBN_DBLCLK<<16|6
,str lb2t
,_i=LB_SelectedItem(lParam lb2t)
,if(_i=-1)
,,LB_SelectItem(lParam 0)
,,_i=LB_SelectedItem(lParam lb2t)
,int lb6ic=LB_GetCount(lParam)
,if(lb6ic<>lb6lc)
,,ARRAY(str) b=itemslb2
,,for i 0 b.len
,,,if(StrCompare(b[i] lb2t)=0)
,,,,_i=i
,,,,break
,LB_SelectedItem(id(4 hDlg)  _s)
,mac+ _s
,SendMessage(h SCI.SCI_GOTOLINE _i+1 0)
,int ii=findrx(lb2t "Sub." 0 1)
,if ii!=-1
,,int cp=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
,,cp+ii
,,SendMessage(h SCI.SCI_GOTOPOS cp 0)
,sub.FlashCodeLine(_i+1 h)
,clo hDlg
ret 1

#sub gotoitemedit
function~ ~name
str pattern="(?m)^(.+\s\:.+)"
_s.getmacro(name 0)
str ss d
int i
ARRAY(str) a
findrx(_s pattern 0 4 a)
for i 0 a.len
,d.formata("%s[]" a[0 i])
ret d.trim

#sub FlashCodeLine
function line hce
if(!hce) hce=GetQmCodeEditor
int indicator=19
SendMessage(hce SCI.SCI_SETINDICATORCURRENT indicator 0)
SendMessage(hce SCI.SCI_INDICSETALPHA indicator 100)
SendMessage(hce SCI.SCI_INDICSETFORE indicator 0x00FF00)
SendMessage(hce SCI.SCI_INDICSETSTYLE indicator SCI.INDIC_STRAIGHTBOX)
SendMessage(hce SCI.SCI_INDICSETUNDER indicator TRUE)
int lsp=SendMessage(hce SCI.SCI_POSITIONFROMLINE line 0)
int lep=SendMessage(hce SCI.SCI_GETLINEENDPOSITION line 0)
rep 4
,SendMessage(hce SCI.SCI_INDICATORFILLRANGE lsp lep-lsp)
,0.25
,SendMessage(hce SCI.SCI_INDICATORCLEARRANGE lsp lep-lsp)
,0.25
SendMessage(hce SCI.SCI_SETINDICATORCURRENT 0 0)

#sub EditSubclassProc
function# hwnd message wParam lParam uIdSubclass dwRefData

int Phwnd= GetParent(hwnd)
;OutWinMsg message wParam lParam
sel message
,case WM_GETDLGCODE
,sel(wParam) case VK_RETURN ret DLGC_WANTALLKEYS ;;send WM_KEYDOWN instead of closing the dialog
,case WM_CHAR
,sel(wParam) case VK_RETURN ret 0
,case WM_KEYDOWN
,sel wParam ;;virtual key code
,,case VK_RETURN
,,;on enter in the edit box select the item in the list box
,,sel uIdSubclass
,,,case 3
,,,SendMessage Phwnd WM_COMMAND LBN_SELCHANGE<<16|GetDlgCtrlID(id(4 Phwnd)) id(4 Phwnd)
,,,case 5
,,,SendMessage Phwnd WM_COMMAND LBN_DBLCLK<<16|GetDlgCtrlID(id(6 Phwnd)) id(6 Phwnd)
,,ret
,,case [VK_DOWN,VK_UP,VK_PRIOR,VK_NEXT]
,,;relay these keys to the listbox and not to the edit box
,,sel uIdSubclass
,,,case 3
,,,SendMessage id(4 Phwnd) message wParam lParam
,,,case 5
,,,SendMessage id(6 Phwnd) message wParam lParam    
,,ret

int R=DefSubclassProc(hwnd message wParam lParam)

sel message
,case WM_NCDESTROY
,RemoveWindowSubclass(hwnd &sub.EditSubclassProc uIdSubclass)

ret R

#sub ListBoxSubclassProc 
function# hwnd message wParam lParam uIdSubclass dwRefData

sel message
,case WM_GETDLGCODE
,sel(wParam) case VK_RETURN ret DLGC_WANTALLKEYS ;;send WM_KEYDOWN instead of closing the dialog
,case WM_KEYDOWN
,sel(wParam) case VK_RETURN SendMessage GetParent(hwnd) WM_COMMAND LBN_DBLCLK<<16|uIdSubclass hwnd; ret 

int R=DefSubclassProc(hwnd message wParam lParam)

sel message
,case WM_NCDESTROY
,RemoveWindowSubclass(hwnd &sub.ListBoxSubclassProc uIdSubclass)

ret R

#sub DisableEnableAutoText 
function mode [str'dati] [str&atItems] [str&atditems]
QMITEM q; int i
ARRAY(str) atn atd
rep
,i=qmitem(-i 1|16 &q 1)
,if(i=0) break
,if q.itype=4
,,atn[]=q.name
,,sel mode
,,,case 1 ;;disable
,,,if(dis(q.name)) atd[]=q.name
,,,else dis+ q.name
,,,case else ;;enable
,,,int fdat=findw(dati q.name 0 "[]") 
,,,if fdat = -1
,,,,dis- q.name
if(mode <>1) ret
atItems=atn
atditems=atd

using this code can run edit existing autotext from add autotext dialog

Function Add_AutoText_Dialog_New
Trigger CSAa     Help - how to add the trigger to the macro
Code:
Copy      Help
out 
str s.getsel
QMITEM q; int i
ARRAY(str) atn
rep
,i=qmitem(-i 1|16 &q 1)
,if(i=0) break
,if q.itype=4
,,atn[]=q.name
_s=atn
str dd=
;BEGIN DIALOG
;0 "" 0x90C80AC8 0x0 0 0 360 208 "Add AutoText"
;3 Edit 0x54030080 0x200 64 8 287 16 "text" "• text that you must type to execute statements.[]• Can be used any characters, including spaces, tabs and line breaks.[]• Can be used escapesequences.[]"
;4 Edit 0x54231044 0x200 64 32 287 80 "Statements" "statements - []• Full text[]• any commands that you can use in macros.[]• To separate multiple statements, use semicolons.[]"
;9 Button 0x54012009 0x0 64 120 122 10 "Template for KeyAutoInputDialog" "Check here if statement is a Template for KeyAutoInputDialog"
;13 Button 0x54012009 0x0 248 120 103 10 "Multiline/Singleline Autotext" "Click here if statement is for multiline or singleline Autotext(default)"
;12 Edit 0x54030080 0x200 64 136 287 16 "" "A brief explanantion for a popup list when autotext has multiple items of the same Abbreviation[]or when Autotext confirmation option is set"
;5 ComboBox 0x54230242 0x0 64 160 135 213 ""
;6 Static 0x54000000 0x0 8 160 44 16 "Add to:"
;7 Static 0x54000000 0x4 8 8 48 16 "Abbreviation:"
;8 Static 0x54000000 0x4 8 32 44 16 "Statement:"
;11 Static 0x54000000 0x0 8 136 44 16 "Comment:"
;15 Button 0x44030F00 0x0 6 50 48 14 "+ inp_name"
;16 Button 0x44030F00 0x4 6 71 48 14 "+ sel_name"
;17 Button 0x44032000 0x4 6 92 48 14 "+ var_name"
;10 Button 0x54030000 0x4 240 184 48 14 "Add"
;14 Button 0x54030000 0x0 8 184 79 14 "Edit Existing Autotext"
;2 Button 0x54030000 0x4 304 184 48 14 "Cancel"
;END DIALOG
;DIALOG EDITOR: "" 0x2040802 "*" "" "" ""

str controls = "3 4 9 13 12 5"
str e3tex e4Sta o9Tem o13Mul e12 cb5
if s.len
,e4Sta=s
o13Mul=1
cb5=_s
if(!ShowDialog(dd &sub.DlgProc &controls)) ret
str cbt
findrx(cb5 "\s[\x80-\xff]+|\s[a-zA-Z0-9]+" 0 1 cbt)
cbt.trim
str result=val(cb5)
if(result =-1)
,int ni=newitem(cbt "/b/i/c/m" "Autotext" "$t" "" 4)
str Abbreviation=iif((e3tex=" " or empty(e3tex)) "Text" e3tex) 
str comment=iif((e12=" " or empty(e12)) "Description" e12)
str statement=e4Sta
mac+ cbt
err
,mac+ ni
ARRAY(str) atl
if(numlines(statement) >1)
,atl=statement
,for i 0 atl.len
,,atl[i].from(" " atl[i])
,statement=atl
,statement.rtrim
,if(o13Mul=1)    
,,statement- "_s= []"
,,statement+ "[]paste _s"
,else
,,statement- "_s=[]F[]"
,,statement+ "[]PasteAutoInputDialog(_s)"        
else
,,if(o13Mul=1)
,,,statement- "''"
,,,statement+ "''"
,,else
,,,atl=statement
,,,for i 0 atl.len
,,,,atl[i].from(" " atl[i])
,,,statement=atl
,,,statement.rtrim
,,,statement- "_s=[]F[]"
,,,statement+ "[]PasteAutoInputDialog(_s)"            
int h=GetQmCodeEditor
SendMessage(h SCI.SCI_GOTOLINE 1 0)
InsertStatement(statement comment "" 2)
int r
if(result != -1)
,r=sub.GetInsertedTextCaretPosition(1)
else
,SendMessage(h SCI.SCI_GOTOLINE 1 0)
,r=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
SendMessage(h SCI.SCI_SETSEL r r+4)
Abbreviation.setclip
SendMessage(h SCI.SCI_PASTE 0 0)
int cp=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
sub.check_for_comment(cp h comment)
cp+7
SendMessage(h SCI.SCI_GOTOPOS cp 0)
sub.FlashCodeLine(cp h)
#sub DlgProc
function# hDlg message wParam lParam

sel message
,case WM_INITDIALOG
,SendMessage id(3 hDlg) EM_SETCUEBANNER TRUE @"Enter Text"
,SendMessage id(4 hDlg) EM_SETCUEBANNER TRUE @"Enter Statements"    
,SendMessage id(12 hDlg) EM_SETCUEBANNER TRUE @"Enter Comment"
,SendMessage id(5 hDlg) CB_SETCUEBANNER 0 @"Select Autotext file to add text to"
,DT_SetAccelerators(hDlg "400 Az")
,case WM_DESTROY
,case WM_COMMAND goto messages2
ret
;messages2
sel wParam
,case CBN_EDITCHANGE<<16|5
,sub.CB_AutoComplete lParam    
,case IDOK
,case IDCANCEL
,case 10 ;;Add
,DT_Ok hDlg
,case 13 ;;Multiline/Singlelin Autotext
,hid id(15 hDlg)
,hid id(16 hDlg)
,hid id(17 hDlg) 
,case 9 ;;Template for KeyAutoInputDialog
,hid- id(15 hDlg)
,hid- id(16 hDlg)
,hid- id(17 hDlg)
,case [15, 400];;+ inp_name
,_s.getsel(0 0 id(4 hDlg))
,if _s.len
,,str s.from("$inp_" _s "$")
,,s.setsel(0 id(4 hDlg))
,else
,,mes "You must first select  a word in the edit box"
,case 16 ;;+ sel_name
,str aid_sel=sub.Get_AID_sel_AID_var("sel")
,_i=ListDialog(aid_sel "Select an  option from the list below" "AID_sel")
,if(_i=0) ret
,aid_sel.getl(aid_sel _i-1)
,act id(4 hDlg)
,paste aid_sel
,case 17 ;;+ var_name
,str aid_var=sub.Get_AID_sel_AID_var("var")
,_i=ListDialog(aid_var "Select an  option from the list below" "AID_var")
,if(_i=0) ret
,aid_var.getl(aid_var _i-1)
,act id(4 hDlg)
,paste aid_var
,case 14 ;;Edit Existing Autotext
,0;
,sub.LaunchEditDialog
ret 1

#sub GetInsertedTextCaretPosition
function# [flags] ;;flags: 1 go to that position
int c=GetQmCodeEditor
SendMessage(c SCI.SCI_UNDO 0 0)
int r=SendMessage(c SCI.SCI_GETCURRENTPOS 0 0)
SendMessage(c SCI.SCI_REDO 0 0)
if(flags&1) SendMessage(c SCI.SCI_GOTOPOS r 0)
ret r

#sub CB_AutoComplete
function hcb

ifk(B) ret
ifk(X) ret
str s ss; int i
s.getwintext(hcb)
if(s.len)
,i=CB_FindItem(hcb s)
,if(i>=0)
,,CB_GetItemText(hcb i ss)
,,if(ss.len>s.len)
,,,ss.setwintext(hcb)
,,,SendMessage(hcb CB_SETEDITSEL 0 ss.len<<16|s.len)
#sub Get_AID_sel_AID_var
function~ ~option 
str oName pattern
sel option
,case "sel"
,oName="AID_sel"
,pattern="\$(?:sel)_(.+?)\$"
,case "var"
,oName="AID_var"
,pattern="\$(?:var)_(.+?)\$"    
_s.getmacro(oName 0)
str ss d
int i
ARRAY(str) aid_S
foreach ss _s
,findrx(ss pattern 0 4 aid_S)
,for i 0 aid_S.len
,,d.formata("%s[]" aid_S[0 i])
ret d.trim

#sub check_for_comment
function curPos h ~comment 
str s ss
if(!h); h=GetQmCodeEditor
int line=SendMessage(h SCI.SCI_LINEFROMPOSITION curPos 0)
SendMessage(h SCI.SCI_GOTOLINE line 0) 
int sp=SendMessage(h SCI.SCI_POSITIONFROMLINE line 0);
int ep=SendMessage(h SCI.SCI_GETLINEENDPOSITION line 0)
int ll=ep-sp
s.fix(SendMessage(h SCI.SCI_GETLINE line s.all(ll+1)))
s.trim
if(findrx(s ";;") <0)
,ss.from(";;" comment)
,SendMessage(h SCI.SCI_GOTOPOS ep 0)
,SendMessage(h SCI.SCI_INSERTTEXT -1 ss)

#sub FlashCodeLine
function curPos hce
if(!hce) hce=GetQmCodeEditor
int indicator=9
int line=SendMessage(hce SCI.SCI_LINEFROMPOSITION curPos 0)
SendMessage(hce SCI.SCI_SETINDICATORCURRENT indicator 0)
SendMessage(hce SCI.SCI_INDICSETALPHA indicator 100)
SendMessage(hce SCI.SCI_INDICSETFORE indicator 0x00FF00)
SendMessage(hce SCI.SCI_INDICSETSTYLE indicator SCI.INDIC_STRAIGHTBOX)
SendMessage(hce SCI.SCI_INDICSETUNDER indicator TRUE)
int lsp=SendMessage(hce SCI.SCI_POSITIONFROMLINE line 0)
int lep=SendMessage(hce SCI.SCI_GETLINEENDPOSITION line 0)
rep 4
,SendMessage(hce SCI.SCI_INDICATORFILLRANGE lsp lep-lsp)
,0.25
,SendMessage(hce SCI.SCI_INDICATORCLEARRANGE lsp lep-lsp)
,0.25
SendMessage(hce SCI.SCI_SETINDICATORCURRENT 0 0)

#sub LaunchEditDialog
Dialog_Edit_Autotext
Very good case, thanks again  Heart
Adding right-click events for the buttons ( + sel_name and + var_name),  can open or edit AID_sel, AID_var, it will be more convenient  Smile


Attached Files Image(s)
   
right click on those two buttons functionality now added

Function Add_AutoText_Dialog_New3
Trigger CSAa     Help - how to add the trigger to the macro
Code:
Copy      Help
out 
str s.getsel
QMITEM q; int i
ARRAY(str) atn
rep
,i=qmitem(-i 1|16 &q 1)
,if(i=0) break
,if q.itype=4
,,atn[]=q.name
_s=atn
str dd=
;BEGIN DIALOG
;0 "" 0x90C80AC8 0x0 0 0 360 208 "Add AutoText"
;3 Edit 0x54030080 0x200 64 8 287 16 "text" "• text that you must type to execute statements.[]• Can be used any characters, including spaces, tabs and line breaks.[]• Can be used escapesequences.[]"
;4 Edit 0x54231044 0x200 64 32 287 80 "Statements" "statements - []• Full text[]• any commands that you can use in macros.[]• To separate multiple statements, use semicolons.[]"
;9 Button 0x54012009 0x0 64 120 122 10 "Template for KeyAutoInputDialog" "Check here if statement is a Template for KeyAutoInputDialog"
;13 Button 0x54012009 0x0 248 120 103 10 "Multiline/Singleline Autotext" "Click here if statement is for multiline or singleline Autotext(default)"
;12 Edit 0x54030080 0x200 64 136 287 16 "" "A brief explanantion for a popup list when autotext has multiple items of the same Abbreviation[]or when Autotext confirmation option is set"
;5 ComboBox 0x54230242 0x0 64 160 135 213 ""
;6 Static 0x54000000 0x0 8 160 44 16 "Add to:"
;7 Static 0x54000000 0x4 8 8 48 16 "Abbreviation:"
;8 Static 0x54000000 0x4 8 32 44 16 "Statement:"
;11 Static 0x54000000 0x0 8 136 44 16 "Comment:"
;15 Button 0x44030F00 0x0 6 50 48 14 "+ inp_name"
;16 Button 0x44030F00 0x4 6 71 48 14 "+ sel_name"
;17 Button 0x44032000 0x4 6 92 48 14 "+ var_name"
;10 Button 0x54030000 0x4 240 184 48 14 "Add"
;14 Button 0x54030000 0x0 8 184 79 14 "Edit Existing Autotext"
;2 Button 0x54030000 0x4 304 184 48 14 "Cancel"
;END DIALOG
;DIALOG EDITOR: "" 0x2040802 "*" "" "" ""

str controls = "3 4 9 13 12 5"
str e3tex e4Sta o9Tem o13Mul e12 cb5
if s.len
,e4Sta=s
o13Mul=1
cb5=_s
if(!ShowDialog(dd &sub.DlgProc &controls)) ret
str cbt
findrx(cb5 "\s[\x80-\xff]+|\s[a-zA-Z0-9]+" 0 1 cbt)
cbt.trim
str result=val(cb5)
if(result =-1)
,int ni=newitem(cbt "/b/i/c/m" "Autotext" "$t" "" 4)
str Abbreviation=iif((e3tex=" " or empty(e3tex)) "Text" e3tex) 
str comment=iif((e12=" " or empty(e12)) "Description" e12)
str statement=e4Sta
mac+ cbt
err
,mac+ ni
ARRAY(str) atl
if(numlines(statement) >1)
,atl=statement
,for i 0 atl.len
,,atl[i].from(" " atl[i])
,statement=atl
,statement.rtrim
,if(o13Mul=1)    
,,statement- "_s= []"
,,statement+ "[]paste _s"
,else
,,statement- "_s=[]F[]"
,,statement+ "[]PasteAutoInputDialog(_s)"        
else
,,if(o13Mul=1)
,,,statement- "''"
,,,statement+ "''"
,,else
,,,atl=statement
,,,for i 0 atl.len
,,,,atl[i].from(" " atl[i])
,,,statement=atl
,,,statement.rtrim
,,,statement- "_s=[]F[]"
,,,statement+ "[]PasteAutoInputDialog(_s)"            
int h=GetQmCodeEditor
SendMessage(h SCI.SCI_GOTOLINE 1 0)
InsertStatement(statement comment "" 2)
int r
if(result != -1)
,r=sub.GetInsertedTextCaretPosition(1)
else
,SendMessage(h SCI.SCI_GOTOLINE 1 0)
,r=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
SendMessage(h SCI.SCI_SETSEL r r+4)
Abbreviation.setclip
SendMessage(h SCI.SCI_PASTE 0 0)
int cp=SendMessage(h SCI.SCI_GETCURRENTPOS 0 0)
sub.check_for_comment(cp h comment)
cp+7
SendMessage(h SCI.SCI_GOTOPOS cp 0)
sub.FlashCodeLine(cp h)
#sub DlgProc
function# hDlg message wParam lParam

sel message
,case WM_INITDIALOG
,SendMessage id(3 hDlg) EM_SETCUEBANNER TRUE @"Enter Text"
,SendMessage id(4 hDlg) EM_SETCUEBANNER TRUE @"Enter Statements"    
,SendMessage id(12 hDlg) EM_SETCUEBANNER TRUE @"Enter Comment"
,SendMessage id(5 hDlg) CB_SETCUEBANNER 0 @"Select Autotext file to add text to"
,DT_SetAccelerators(hDlg "400 Az")
,SetWindowSubclass(id(16 hDlg) &sub.Btn_SubclassProc 16 0)
,SetWindowSubclass(id(17 hDlg) &sub.Btn_SubclassProc 17 0)
,case WM_DESTROY
,case WM_COMMAND goto messages2
ret
;messages2
sel wParam
,case CBN_EDITCHANGE<<16|5
,sub.CB_AutoComplete lParam    
,case IDOK
,case IDCANCEL
,case 10 ;;Add
,DT_Ok hDlg
,case 13 ;;Multiline/Singlelin Autotext
,hid id(15 hDlg)
,hid id(16 hDlg)
,hid id(17 hDlg) 
,case 9 ;;Template for KeyAutoInputDialog
,hid- id(15 hDlg)
,hid- id(16 hDlg)
,hid- id(17 hDlg)
,case [15, 400];;+ inp_name
,_s.getsel(0 0 id(4 hDlg))
,if _s.len
,,str s.from("$inp_" _s "$")
,,s.setsel(0 id(4 hDlg))
,else
,,mes "You must first select  a word in the edit box"
,case 16 ;;+ sel_name
,str aid_sel=sub.Get_AID_sel_AID_var("sel")
,_i=ListDialog(aid_sel "Select an  option from the list below" "AID_sel")
,if(_i=0) ret
,aid_sel.getl(aid_sel _i-1)
,act id(4 hDlg)
,paste aid_sel
,case 17 ;;+ var_name
,str aid_var=sub.Get_AID_sel_AID_var("var")
,_i=ListDialog(aid_var "Select an  option from the list below" "AID_var")
,if(_i=0) ret
,aid_var.getl(aid_var _i-1)
,act id(4 hDlg)
,paste aid_var
,case 14 ;;Edit Existing Autotext
,0;
,sub.LaunchEditDialog
ret 1

#sub GetInsertedTextCaretPosition
function# [flags] ;;flags: 1 go to that position
int c=GetQmCodeEditor
SendMessage(c SCI.SCI_UNDO 0 0)
int r=SendMessage(c SCI.SCI_GETCURRENTPOS 0 0)
SendMessage(c SCI.SCI_REDO 0 0)
if(flags&1) SendMessage(c SCI.SCI_GOTOPOS r 0)
ret r

#sub CB_AutoComplete
function hcb

ifk(B) ret
ifk(X) ret
str s ss; int i
s.getwintext(hcb)
if(s.len)
,i=CB_FindItem(hcb s)
,if(i>=0)
,,CB_GetItemText(hcb i ss)
,,if(ss.len>s.len)
,,,ss.setwintext(hcb)
,,,SendMessage(hcb CB_SETEDITSEL 0 ss.len<<16|s.len)
#sub Get_AID_sel_AID_var
function~ ~option 
str oName pattern
sel option
,case "sel"
,oName="AID_sel"
,pattern="\$(?:sel)_(.+?)\$"
,case "var"
,oName="AID_var"
,pattern="\$(?:var)_(.+?)\$"    
_s.getmacro(oName 0)
str ss d
int i
ARRAY(str) aid_S
foreach ss _s
,findrx(ss pattern 0 4 aid_S)
,for i 0 aid_S.len
,,d.formata("%s[]" aid_S[0 i])
ret d.trim

#sub check_for_comment
function curPos h ~comment 
str s ss
if(!h); h=GetQmCodeEditor
int line=SendMessage(h SCI.SCI_LINEFROMPOSITION curPos 0)
SendMessage(h SCI.SCI_GOTOLINE line 0) 
int sp=SendMessage(h SCI.SCI_POSITIONFROMLINE line 0);
int ep=SendMessage(h SCI.SCI_GETLINEENDPOSITION line 0)
int ll=ep-sp
s.fix(SendMessage(h SCI.SCI_GETLINE line s.all(ll+1)))
s.trim
if(findrx(s ";;") <0)
,ss.from(";;" comment)
,SendMessage(h SCI.SCI_GOTOPOS ep 0)
,SendMessage(h SCI.SCI_INSERTTEXT -1 ss)

#sub FlashCodeLine
function curPos hce
if(!hce) hce=GetQmCodeEditor
int indicator=9
int line=SendMessage(hce SCI.SCI_LINEFROMPOSITION curPos 0)
SendMessage(hce SCI.SCI_SETINDICATORCURRENT indicator 0)
SendMessage(hce SCI.SCI_INDICSETALPHA indicator 100)
SendMessage(hce SCI.SCI_INDICSETFORE indicator 0x00FF00)
SendMessage(hce SCI.SCI_INDICSETSTYLE indicator SCI.INDIC_STRAIGHTBOX)
SendMessage(hce SCI.SCI_INDICSETUNDER indicator TRUE)
int lsp=SendMessage(hce SCI.SCI_POSITIONFROMLINE line 0)
int lep=SendMessage(hce SCI.SCI_GETLINEENDPOSITION line 0)
rep 4
,SendMessage(hce SCI.SCI_INDICATORFILLRANGE lsp lep-lsp)
,0.25
,SendMessage(hce SCI.SCI_INDICATORCLEARRANGE lsp lep-lsp)
,0.25
SendMessage(hce SCI.SCI_SETINDICATORCURRENT 0 0)

#sub LaunchEditDialog
Dialog_Edit_Autotext



#sub Btn_SubclassProc
function# hwnd message wParam lParam uIdSubclass dwRefData

;OutWinMsg message wParam lParam ;;uncomment to see received messages

sel message
,case WM_RBUTTONDOWN
,sel uIdSubclass
,,case 16
,,act id(16 GetParent(hwnd));; select AID_sel button
,,mac+ "AID_sel";;open AID_sel function
,,case 17
,,act id(17 GetParent(hwnd));;select AID_var button
,,mac+ "AID_var";; open AID_var function

int R=DefSubclassProc(hwnd message wParam lParam)

sel message
,case WM_NCDESTROY
,RemoveWindowSubclass(hwnd &sub.Btn_SubclassProc uIdSubclass) 
,
,;case ...

ret R
Wow!! thanks
I just bought a monitor with a higher resolution, and the font on the dialog controls looks a bit small.

How to quickly increase the font size of all controls
It is best to add the code to restart QM after the code, because sometimes the newly added item display position cannot be refreshed. and Memory cannot be released

shutdown -2
Have no idea what your talking about. NO memory problems on my end.
After adding the autotext, it will be in the last position

Before the Add AutoText dialog box is opened, the memory requirement is about 4M. After the addition, the memory will increase to about 10M. I added the restart QM command. Without these problems.
I'm sorry i do not have the same result as you. Memory on my pc is released when the dialog closes. autotext items are placed where they are coded t be placed. any newly created autotext function i can move to any place no problem.

no idea what you mean by this

"the newly added item display position cannot be refreshed"
I will record a video presentation when I have time.
@Kevin

Hello, I have been using the above features, it feels very good, I found three areas for improvement, I haven't solved them yet, can you help me? Thanks a lot. the attachment is related files

1. The newly added AutoText file will be displayed at the end, restart QM, it will be displayed at the top.

2. Cannot add phrases to the correct AutoText file (When the file prefix is ​​the same)

3. When adding a phrase with the same acronym, I need to sort (When the phrase is added, judge it, if there is the same acronym, sort it)

[Image: GIF.gif]


Attached Files
.qml   PSS.qml (Size: 18 KB / Downloads: 211)
for #2 find  
Code:
Copy      Help
findrx(cb5 "\s[\x80-\xff]+|\s[a-zA-Z0-9]+" 0 1 cbt)

and change to this
Code:
Copy      Help
findrx(cb5 "\s[\x80-\xff]+|\s.+" 0 1 cbt)
@kevin
Thanks, question 2 has been resolved Heart

about #1
My solution is to add code at the end:
shutdown -2

about #3
Is there a way to select the area in the red box below? Huh


Attached Files Image(s)
   


Forum Jump:


Users browsing this thread: 1 Guest(s)